Skip to content

Halo | Roll Forming Accessory Supplier | CoilSpot

White Halo Logo

Stick With The Best

 Stick With the Best Roll Forming Accessories

CoilSpot supplies high-quality roll forming accessories designed to improve installation efficiency, durability, and long-term performance. From butyl tape and foam closures to ridge vent systems and moisture control products, our accessories are trusted by roll formers, contractors, and metal roofing professionals across the United States. Each product is engineered to work seamlessly with steel roofing panels and coil systems.

Butyl Tape

Product Features:

  • Has superior adhesive strength
  • Is resistant to UV light
  • Withstands extreme roof temperatures
  • Seal is not affected by expansion and contraction of metal

BT38 

       ✔️ 3/8" x 3/32" x 45' Roll

       ✔️ 48/Box

BT1 

      ✔️  1" x 3/32" x 50' Roll

      ✔️  10/Box


➕ Order by the Pallet 

 Specifications:

BUTYL TAPE (1) 1.pdf

 

Butyl Tape Image

Ag Foam Closures

Product Features:

  • High-density foam blocks airflow.
  • Flame resistant
  • Self-adhesive for simple installation
  • Highly UV-stable material
  • Precut for a snug/tight fit
  • Adheres to wet surfaces
  • Durable crosslinked polythene

3/4" Rib 

      ✔️  3/4" Rib | 9" On Center

      ✔️  100/Box

➕ Order by the Pallet 

Specifications:
FOAM CLOSURE (4) 1.pdf

 

Ag Foam Closure

PBR Foam Closures

Product Features:

  • High-density foam blocks airflow.
  • Flame resistant
  • Self-adhesive for simple installation
  • Highly UV stable material
  • Precut for a snug/tight fit
  • Adhears to wet sufraces and subfreezing tempatures
  • Durable crosslink polyethylene
R Panel

       ✔️ 1 1/4" Rib | 12" On Center

       ✔️ 100/BOX

➕ Order by the Pallet 

PBR Closure
NO FUSS, ALL FUNCTION

Ridge Vent Rolls

Product Features:

  • Allows airflow while blocking the elements.
  • UL900 Class II - flame resistant
  • Self-adhesive for simple installation
  • Highly UV stable material
RV

       ✔️ Length - 20'

       ✔️ Width - 11/2"

       ✔️ Thickenss - 1"

 

➕ Order by the Pallet 

Specifications:
ridge vent roll canva 1.pdf


Ridge Vent Rolls
STRONGER ROOFS START AT THE RIDGE

Ridge Vent Strips

Product Features:

  • Allows airflow while blocking the elements
  • Self-adhesive for simple installation
  • Tough mesh does not wrap up on screws
  • Highly UV stable material
RVS

       ✔️ 3/4" Rib AG Panel

       ✔️ 100/Box

RVSR

       ✔️ R Panel

       ✔️ 100/Box

 

 

➕ Order by the Pallet 

Ridge Vent Strips

Zero Drip

Product Features:

  • Around-the-clock performance
  • Condensation-absorbing felt
  • Superior absorption rate
  • Noise reduction for a quieter roof

RV

       ✔️Available in PBR & 3/4" Rib AG Panel

       ✔️ Length - 2,164'

 

How does Zero Drip work?

When warm air hits the cold metal, condensation forms and drips. Instead, Zero Drip absorbs that moisture, holding it safely until the moisture evaporates naturally, keeping your building dry, clean, and drip-free.

➕ Order by the Pallet 

➕ Order by the Box 

➕ Order by the Truckload

 

Zero Drip-2

Specifications

MATERIAL TECHNICAL SPECIFICATION

Butyl Tape Date Report

 

BUTYL TAPE DATE REPORT
Test Item Test Result Test Standard

Density(g/cm3)

1.55+0.1

GB/T533-2008

Penetration INDEX 1/10mm, 23+2°C

55

GB/Т4509-2010

Elongation %

≥400

GB/T528-2009

Solid Content %, 105+2°C

99.8

GB/Т2793-1995

Heating sagging 120÷2°C

No flow, No cracking, No deformation

GB/T328.11-2007

Low temperature bending -40+2°C

No Cracks

GB 12953-2003

Peel Strength 23+2°C

2.2

GB/T2792-1998

Tensile shear strength Kpa

120

GB/17124-2008

All test results and recommendations are based on laboratory tests. Specific job site conditions should be taken into consideration when specifying the proper fastener. Actual field values may vary, therefore we assume no liability for use of this information. Pull out values are a measurement of material strength.

FILTER FOAM CERTIFICATION

Ridge Vent Roll

Specifications:

  • 1000*2000M

Density:

  • 25±2 KG\M3

Operating Temperature:

  • 1-50°C to +50°C
Service Life:
  • More than 5 years

Environmental Protection:

  • Compliant (Yes)
Dimensional Tolerance
Length & Width Tolerance

± 2 mm (Qualified)
Thickness Tolerance

± 2 mm (Qualified)
Aperture Tolerance

                   ± 2 kg/m³                      (Density range 23–28 kg/m³ considered qualified)

 

Performance Characteristics
Item Specification
Antistatic Ability

8.0 × 10¹⁰
Ventilation Rate

95%
Wind Resistance

90 Pa
Acid & Alkali Resistance

pH 15–20
Flame Retardant Grade 

UL900 Class II

 

Main Ingredients:
• Polyester Polyols
• Toluene
• Two Different Cyanate Fa
• Methylene Chloride
• Silicone Oil, Compound
• Pigment

Mechanical & Physical Properties

All test results and recommendations are based on laboratory tests. Specific job site conditions should be taken into consideration when specifying the proper fastener. Actual field values may vary, therefore we assume no liability for use of this information. Pull out values are a measurement of material strength.
Property Value

Surface Density

25–30 kg/m³
Tensile Strength

≤ kPa
Elongation

≤ 90%
75% Compression Permanent Deformation

≤ 6.0%
Rebound Rate

≤ 90%
Tear Strength

≤ 10.0 N/cm
Hardness at 25% Compression

≤ 70
Hardness at 65% Compression

≤ 120
Hardness at 65% Compression

≤ 1.5